www.vishay.com for technical questions, contact: ff2aresistors@vishay.com document number: 31023 54 revision: 11-mar-10 erl (military rlr) vishay dale metal film resistors, military/established reliability, mil-prf-39017 qualified, type rlr features ? meets requirements of mil-prf-39017 ? failure rate: ve rified failure rate (contact factory for current level) ? epoxy coated construction provides superior moisture protection ? traceability of materials and processing ? monthly lot acceptance testing ? very low noise (- 40 db) ? extensive stocking program at distributors and factory in 1 % and 2 % tolerances ? vishay dale has complete capability to develope specific reliability programs design ed to customer requirements notes (1) extended resistance range: dscc has created a series of drawings intended to support extended resistance ranges left otherwise void by the discontinuation of mil-r-39008 rcr carbon composition resistors. vishay dale is listed as a re source on these drawings as f ollows: ? low inductance: dscc has created a drawing intended to support a resistor which exhibits low inductance over a frequency range of 1 mhz to 30 mhz. vishay dale is listed as a resource on these drawings as follows: these drawings can be viewed at: www.dscc.dla.mil/programs/mils pec/listdwgs.asp?doctype=dsccdwg (2) consult factory for current qpl failure rates (3) hot solder dipped leads (4) continuous working voltage shall be or ma ximum working voltage, whichever is less. standard electrical specifications vishay dale model mil-prf-39017 style mil spec. sheet power rating 70 c w resistance range (1) tolerance % temperature coefficient ppm/c maximum working voltage (4) v life failure rate (2) erl05, erl05..19 (3) rlr05 05 0.125 4.7 to 301k 1, 2 100 200 m, p, r, s 302k to 1m m, p, r erl07, erl07..23 (3) rlr07 01 0.25 1 to 9.76 1, 2 100 250 m 10 to 3.01m m, p, r, s 3.02m to 10m m, p, r erl20, erl20..11 (3) rlr20 02 0.50 4.3 to 3.01m 1, 2 100 350 m, p, r erl32, erl32..1 (3) rlr32 03 1.0 1 to 2.7m 1, 2 100 500 m, p, r dscc drawing number vishay dale model power rating p 70 c w resistance range tolerance % temperature coefficient ppm/c maximum working voltage v (4) 98020 erl05..36, erl05..37 (3) 0.125 1.1m to 22m 2, 5, 10 350 200 99011 erl07..100, erl07..101 (3) 0.25 11m to 22m 2, 5, 10 350 250 98021 erl20..36, erl20..37 (3) 0.50 3.3m to 22m 2, 5, 10 350 350 98022 erl32..36, erl32..37 (3) 1.0 3m to 22m 2, 5, 10 350 350 97004 erl62..1, erl62..2 (3) 2.0 10 to 2.7m 3m to 22m 1, 2, 5, 10 100 350 500 dscc drawing number vishay dale model power rating p 70 c w resistance range maximum inductance nh tolerance % temperature coefficient ppm/c maximum working vol tag e v (4) 96002 erl07..62 0.25 1 to 10 10 1, 2 100 250 11 to 49.9 8 technical specifications parameter unit condition voltage coefficient, max. ppm/v 5/v when measured between 10 % and full rated voltage dielectric strength v ac rlr05 = 300; rlr07 and rlr20 = 500; rlr32 = 1000 insulations resistance ? 10 9 min. dry; 10 11 min. after moisture test operating temperature range c - 65 to + 150 terminal strength lb 2 lb pull test on rlr05; 5 lb pull test on all other sizes solderability continuous satisfactory coverage wh en tested in accordance with mil-std-202, method 208 weight g rlr05 = 0.11; rlr07 = 0.35; rlr20 = 0.75; rlr32 = 1.50 p x r
document number: 31023 for technical questions, contact: ff2aresistors @vishay.com www.vishay.com revision: 11-mar-10 55 erl (military rlr) metal film resistors, milit ary/established reliability, mil-prf-39017 qualified, type rlr vishay dale note (1) 1.08 0.125 (27.43 3.18) if tape and reel power rating power ratings are based on the following two conditions: 1. 2.0 % maximum r in 2000 h load life 2. + 150 c maximum operating temperature global part number information dimensions in inches (millimeters) rlr07 c 3001 f r r36 tolera n ce code failure rate rlr05 f = 1 % m = 1.0 % /1000 h b14 = tin/lead, bu lk bsl = tin/lead, bu lk, single lot date code r36 = tin/lead, t/r (f u ll, except 32?s) r64 = tin/lead, t/r (f u ll; 32?s only) re6 = tin/lead, t/r (1000 pieces) rsl = tin/lead, t/r, single lot date code rlr07 g = 2 % p = 0.1 % /1000 h rlr20 b y a m u ltiplier use ?r? for v al u es < 100 r = 0.01 % /1000 h 0 0 r 1 = 1.0 s = 0.001 % /1000 h 3302 = 33 k 1005 = 10 m new global part numbering: rlr07c3001frr36 (preferred part numbering format) rlr07c3 00 1 frr3 6 historical part number example: rlr07c3001fr (will continue to be accepted) mil style lead material resista n ce v alue tolera n ce code failure rate packagi n g blank = standard (dash n u m b er) (up to 3 digits) from 1 to 999 as applica b le 1 = hot solder dip (32?s) 11 = hot solder dip (20?s) 19 = hot solder dip (05?s) 23 = hot solder dip (07?s) = soldera b le/ c resista n ce v alue fig u re, follo w ed mil style lead material pac k ag i n g special rlr32 w elda b le 3 digit significant a d b e (1) c (max.) vishay dale model ab c (max.) de erl05 0.150 0.020 (3.81 0.51) 0.066 0.008 (1.68 0.21) 0.187 (4.75) 0.016 0.002 (0.41 0.05) 1.25 0.266 (31.75 6.76) erl07 0.250 0.031 - 0.046 (6.35 0.79 - 1.17) 0.090 0.008 (2.29 0.21) 0.300 (7.62) 0.025 0.002 (0.64 0.05) 1.50 0.125 (38.10 3.18) erl20 0.375 0.041 (9.53 1.04) 0.138 0.023 (3.51 0.58) 0.450 (11.43) 0.032 0.002 (0.81 0.05) 1.50 0.125 (38.10 3.18) erl32 0.562 0.031 (14.27 0.79) 0.190 0.015 (4.83 0.38) 0.625 (15.87) 0.032 + 0.002 - 0.001 (0.81 + 0.05 - 0.03) 1.50 0.125 (38.10 3.18) erl62 0.562 + 0.031 - 0.042 (14.27 + 0.79 - 1.07) 0.230 0.015 (5.84 0.38) 0.650 (16.51) 0.032 + 0.002 - 0.001 (0.81 + 0.05 - 0.03) 1.50 0.125 (38.10 3.18) material specifications element vacuum-deposited nickel-chrome alloy core fire-cleaned high purity ceramic encapsulation specially formulated epoxy compound termination standard lead material is solder-coated copper solderable and weldable per mil-std-1276, type c. applicable mil-specifications mil-prf-39017: the erl series meets the electrical, environmental and dimensional requirement s of mil-prf-39017. mil-prf-22684: mil-prf-39017 supercedes mil-prf-22684 on new designs. the erc series meet or exceed mil-prf-22684 requirements. documentation: qualification and failure rate verfication test data is maintained by vishay dale and is available upon request. lot traceability and identific ation data is maintained by vishay dale for five years. cage code: 91637
www.vishay.com for technical questions, contact: ff2aresistors@vishay.com document number: 31023 56 revision: 11-mar-10 erl (military rlr) vishay dale metal film resistors, mili tary/established reliability, mil-prf-39017 qualif ied, type rlr ambient temperature in c derating rated power in % 70 0 20 40 60 8 0 100 120 - 65 - 50 - 25 0 25 50 75 100 125 150 175 200 0 20 40 60 8 0 100 120 applied power in w heat rise (c above ambient) 0 0.125 0.25 0.375 0.5 0.625 0.75 0. 8 75 1 1.125 thermal resistance erl32 erl20 erl07 erl05 marking - per mil-prf-39017
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
